Part Number Hot Search : 
MC14419P MPS455 D103C RCL4K5E MUR405 OL7272 UNIFOX FAN1655
Product Description
Full Text Search
 

To Download HDC250P-48B Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 H HiTRON
36-72VDC INPUT RANGE DC-DC CONVERTER HOT-SWAP CompactPCI QUAD OUTPUT 250 WATTS ACTIVE CURRENT SHARING SWITCHING POWER SUPPLIES HDC250P-48B SERIES
FEATURES:
250W 3U X 8HP EUROCARD PACKAGE 36-72VDC NOMINAL 48VDC INPUT INTERNAL OR-ING DIODES FOR N+1 REDUNDANCY HOT-SWAPPABLE THIRD-WIRE CURRENT SHARING EMI MEET EN 55022 / FCC CLASS B CE MARKING COMPLIANCE FULLY COMPLIANT WITH PICMG
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 36-72Vdc,nominal input 48Vdc. Input Connector: Positronic 47-pin PCIH47M400A1. Inrush Current: Typ. 20A @ nominal 48Vdc. Input Current: 6.6A @ nominal input 48Vdc. Dielectric Withstand: Meet IEC 60950-1 regulation. EMI: Meet EN 55022 / FCC Class B. Remote ON/OFF: Available at [INH#] & [EN#] pins. Power Fail Signal: Available at [FAL#] pin. Status LED: means valid input voltage. means a critical fault. Thermal Protection (OTP): Installed NTC for thermal sensor at [DEG#] pin.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 250W continuous. Output Connector: Positronic 47-pin PCIH47M400A1. Line Regulation: Typ. 0.1%. Load Regulation: Typ. 2.0%. Noise & Ripple: Typ.1% Pk.-Pk. or 50mV, whichever is greater. OVP: Built-in at all outputs. Adjustability: Available at VO1,2&3. Output Trim: Electrical trim available at VO1/2.[ADJ #] Remote Sensing: Available at VO1,VO2 & VO3. Hot-Swap: Available. N+1 Redundancy: Installed with internal OR-ing diodes at all outputs for N+1 redundancy operation. Current Sharing: Third-wire current sharing at VO1,2&3. Power OK Signal: Available for all outputs. Over Current Protection (OCP): Installed in each rail. Overload Protection (OLP): Fully protected against output overload or short circuit. Typical 120% max. load. Consult the factory for special OLP setting. Operating Temperature: 0 to +50 C at full load with specified air flow. Deraes linearly to 50% at +70C. Storage Temperature: -40 to +85 C. Temperature Coefficient: Typ. 0.02% / C. Cooling: At least 16 cfm (500 lfm) moving air is required to achieve full rating power 250W in a confined area. Power Density: 4.58 Watts/ Cubic Inch.
GENERAL SPECIFICATION
Efficiency: Typ. 79 %. Switching Frequency: 120K Hz. Circuit Topology: Forward circuit. Transient Response: Peak transient less than 100mV and recovers within 2mS for 25% load-change. Safety Standard: IEC 60950-1 Class I. Construction: Eurocard 3U X 8HP X 160mm CompactPCI format. Front panel with either Ordinary handle or Extractor handle.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
For the details of safety approval, please consult the factory.
-19-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
QUAD OUTPUT
MAIN +VO1 @# MODEL NO. Min. Typ. Volt. Max. Min HDC250P-48B-490(E) HDC250P-48B-490(O) 0A 0A 25A 25A +5V +5V 33A 33A 0A 0A Typ. 18A 18A Volt. Max. Min. +3.3V 33A +3.3V 33A 0A 0A Typ Volt. Max Pk. Min. Typ. Volt. Max. Pk. 5A +12V 5.5A 6A 0A 0.5A -12V 1A 1.5A 5A +12V 5.5A 6A 0A 0.5A -12V 1A 1.5A AUX. +VO2 @# AUX. +VO3 @# AUX. -VO4 =
Symbol: "" OVP built-in. "@" Adjustable. "#" Remote sensing. "" 3rd wire Load Sharing. "" Installed with Or-ing diode. "" Magnetic Amplifier. "" Installed with Post-regulator. "" Common Choke. Remark: Peak load less than 60sec. with duty cycle <10%. Max. load is the continuous operating load of each rail. But the max. load of each rail can't be drawn from all outputs at the same time.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 666.0 g (23.5 Oz.)
HDC250P-48B-490(E)
HDC250P-48B-490(O)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
DC INPUT ASSIGNMENT -Vin +Vin G CNTR &PIN # 47 46 45 QUAD OUTPUT VO1 1,2, 3,4 S+ 30 S- Adj. C.S. 34 29 35 VO2 13,14, 15,16, 17,18 S+ 33 Adj. C.S. 32 41 VO3 20 S+ 36 C.S 44 VO4 21 DC COM EN# 5,6,7,8,9, 10,11,12, 27 19,22,24 STATUS/CONTROL DEG# 38 INH# FAL# 39 42
Mating connector: PCIH47F400A1.
-20-


▲Up To Search▲   

 
Price & Availability of HDC250P-48B

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X